lubricant for drilling metal
This is a high-quality lubricant. Drilling lubricant is mainly used in oilfield drilling, especially in some water-based system drilling fluids. It is a very good additive. It is also an efficient water-based mud that can penetrate Enhancers. It can better reduce the friction coefficient and its torque, and maximize its lubricity in various scenarios.
lubricant for drilling metal
lubricant for drilling metal
Physical appearance …………….……Light yellow to brown liquid
Density(g/cm3) …………………………………………….0.80-1.0
Density change increase. value(g/cm3) …………………… ≤±0.08
Apparent viscosity change value(mPa·s)……………………≤5
Lubrication coeff. reduction…………………………………… ≥70%
Normal concentrations of lubricants range from 1 to 3%, depending on the mud density, coefficient of friction and the mud system. After the initial treatment, periodic treatments should be made to maintain the desired concentration.
Higher concentrations may be required for pills and special applications. Treatment levels and product usage depend on the rate of penetration, solids-control equipment and dilution rates.
One suggested application method consists of maintaining a small, constant stream, added directly into the suction pit. lubricants is compatible with common water base mud additives and is a low-fluorescent additive.
There are many types of lubricants, including soluble oils, synthetic lubricants, dry lubricants and cutting oils. Cutting oil is the primary lubricant used in drilling.
Because during the drilling process, friction and heat will be generated by the drilling tools and the well. After you use lubricant, you can reduce the heat and friction generated during the drilling process, which can extend the life of the drilling tool. After the service life is extended, it can improve the drilling efficiency. quality and its overall efficiency.
Generally speaking, we use drilling lubricants to extend the service life of drilling tools, mainly to help lubricate drill bits and cutting tools and extend the service life of these tools. Lubricant also cleans the drill better and cools the bit, making it smoother. Applying lubricant can also help prevent the drill bit from becoming clogged with cuttings. This process of extending the service life of the tool can reduce the overall cost of drilling and reduce breakage.
25kg or 180kg plastic drums or according to customer’s requirement.
Avoid high-intensity extreme pressure, heat and prolonged exposure to strong sunlight.